Cozy MKIV Builder's Log Book - March 1999
|
| DATE |
DESCRIPTION |
TIME |
|
| 3/6/99 |
- Flox and 1 BID static line in place
- Glass 3 BID pad for adel clamp
- Glass 1 BID over rear of front auxiliary power I.P. hole
- Sand and trim previous layups
- Mount engine mount on fuselage
- Build engine stand - unpack engine
- Glass 2 BID front of cockpit light nacelles
|
6 hrs |
| 3/10/99 |
- Make new nutplate holders for gascolator - mount gascolator
- Sand and trim previous layups
- Mount cockpit lights in nacelles and test
- Mount fuel pump on firewall - plumb primer valve
- Mount fuel filter on forewall - plumb all
|
4 hrs |
| 3/12/99 |
- Make new nutplate holder for gascolator and fuel filter and primer bracket
- Mount everything
- Make bracket for primer valve
|
2 hrs |
| 3/13/99 |
- Wire primer and fuel pump - use adel clamps - make nutplate holder for firewall
- Fit 2" foam to firewall for cowling lip - cut glass
- Make mixture cable bracket
|
4 hrs |
| 3/14/99 |
- Glass 4 BID cowling lip top and bottom
- Flox and glass 1 BID all nutplate holders
- Continue making mixture cable bracket
- Make engine hoist
- Lift engine onto engine stand
- Replace oil adapter with B&C oil filter adapter - replace vernatherm and install oil
temp sender
- Install vacuum pump on engine
- Safety wire oil filler tube
|
8 hrs |
| 3/20/99 |
- Install Ellison on engine
- Install engine mount on engine
- Mount engine on firewall
- Drill holes for throttle and mixture cables
- Test attach throttle and mixture cables to Ellison
|
6 hrs |
|
|
 |