Cozy MKIV Builder's Log Book - July 1998
|
DATE |
DESCRIPTION |
TIME |
|
7/7/98 |
- Cut and fit 2 vent lines (1/4" tube) and one fuel injection return line (3/8"
tube) for right side fuel tank
- Re-micro edges of R33 hole and fuselage/strake cutouts
- Micro tubes in place
- Glass 1 BID T.E. top strake - epoxy and peel ply whole strake
- Glass 2 BID fuselage strake interior
- Flox screen on hole (1 1/4")
|
5 hrs |
7/8/98 |
- Trim and sand previous layups
- Remove wing from spar
- Cut glass for 2" "T" hats for ribs (and peel ply)
- Cut fuel sender to length
- Cut and bend fuel tubing in fuselage rear
|
6 hrs |
7/9/98 |
- Glass 2" "T" hats on ribs - micro to height first
- Reposition fuselage in garage
|
4 hrs |
7/11/98 |
- Trim and sand previous layups
- Decide to redo fuel system - use original parts and layout
|
1 hrs |
7/12/98 |
- Cut glass for 2" "T" hat underside reinforcements
- Micro and glass "T" hat underside reinforcements
- Build flox wall on fuselage side for strake top
|
4 hrs |
7/19/98 |
- Trim and sand previous layups
- Remove tape from top strake
- Finish cutting and bending fuel tubing in fuselage
d) Glass and flox both fuel lines to fuselage and through to exterior
|
4 hrs |
7/29/98 |
- Flox top strake to ribs and spar - weigh down
|
2 hrs |
|
|
|
Copyright © 1998, All Rights Reserved, Marc J. Zeitlin