From: Epplin John A Subject: RE: COZY: chapter3 practice part Date: Wed, 13 Oct 1999 09:37:18 -0500 Dewayne: Don't worry about the 2 hours, you will get much faster. Also, 72 is about min for a good lay-up, I know some people will say it is too low, probably is for perfection but after all we are only building airplanes. Does anyone know where that flat plate goes? I have cut pieces from it several times for shims and tabs to screw to etc. John Epplin Mk4 #467 still sanding! > -----Original Message----- > From: dewayne morgan [SMTP:dmorgan@mis.net] > Sent: Wednesday, October 13, 1999 9:20 AM > To: cozy_builders@canard.com > Subject: COZY: chapter3 practice part > > builders, > > May I substitute h45 PVC foam in place of the green foam in the practice > confidence layup in chapter 3 ?? > > Also, what is the 10x16 flat part made in chapter 3 used for later? Mine > weight 10.75 ounces, but took me two hours instead of 30 minutes (at 72 > degrees). Am i overdoing this or is that expected at that temperature and > my level of experience? > > thanks >