From: MISTER@neesnet.com Date: Thu, 10 Jul 97 07:42:58 EST Subject: COZY: Wheel Pants I a currently installing wheel pants on my Cozy 3 place. According to the instructions I received from Featherlight, after glassing the two halves together you are supposed to cut them apart again using a semicircular cutout on the inboard side. This cutout mounts to the gear strut and the outboard side is held on to this part with screws. There are no indications of what the diameter of the semicircular cutout should be. Anyone have any suggestions? Also, most of the pictures I see of wheel pants use a different arrangment. The cut on these seems to be a straight vertical cut down the inboard and outboard sides of the pant. Is this a better way to do it? Are there any instructions out there describing this approach and the bracket, etc,. involved? Bob Misterka N342RM